With the use of the Skin Tags product, skin tags on the neck, under armpits and under breasts can be easily and effectively removed by freezing them through cryotherapy. Cryotherapy is a reliable freezing method that has been used by general practitioners and dermatologists for many years and is proven effective.
The product consists of a dispenser containing a cryogen (aerosol gas) and a permanently fixed applicator. With the single-use disposable foam tips, which should be replaced for each skin tag treatment, the skin tag can be tipped and frozen in a hygienic manner. The supplied protective patch, which should be applied around the skin tag before the treatment, protects the surrounding healthy skin, which allows precise treatment.
After treatment, the skin tag usually comes off the skin after 10 to 14 days and new, healthy skin becomes visible. In most cases, a single application of the Skin Tags product is sufficient to remove the skin tag.
This product is a medical device, the instructions should be read carefully before use.
1 Aerosol dispenser with cap, containing 38 ml dimethyl ether
8 Protective plasters
8 Single use disposable foam tips in holder
1 Instruction for use
Before using the Skin Tags product, it is for the end user important to determine whether he or she is dealing with a skin tag.
Treatment method for skin tags
The plastic applicator cap should not be removed from the aerosol!
Step 1: Place a protective plaster around the skin tag that will be treated.
Step 2: Insert the interchangeable foam tip holder into the opening of the applicator cap. When doing so, hold the aerosol firmly by the applicator cap and, while inserting the foam tip holder, point the aerosol downwards. Do not place the foam tip on the skin tag yet.
Step 3: Press 4 times firmly in quick succession on the bottom of the aerosol can to moisturise the foam tip. Keep the aerosol pointed downwards for another 10 seconds. Make sure to keep the foam tip away from the body when the spray is being activated.
Step 4: Lightly press the foam tip against the skin tag for 40 seconds.
Step 5: Remove the protective plaster immediately after the treatment.
Step 6: Remove the foam tip including the holder from the applicator cap by pulling up the bottom of the holder in which the foam tip is attached. When doing so, keep the aerosol with the applicator cap facing downwards. Discard the interchangeable foam tip holder after use.
Caution! HeltiQ Skin Tags is contraindicated for the following:
Did you know that? The effect of freezing a skin tag is even better immediately after showering? The tissue of the skin tag is then softer, allowing the product to do its job even better.