With the use of the Wart Freezer product, hand, foot and water warts can be easily and effectively removed by the end user, by freezing them through cryotherapy. Cryotherapy is a reliable freezing method that has been used by general practitioners and dermatologists for many years and is proven effective.
The Wart Freezer product owes its dual application for treating hand and foot warts, and water warts to its convenient dosage method. The spray can makes it easy to dose the right amount for each type of wart. By placing the specially designed dispenser cap over the wart, the wart is surrounded and healthy skin is protected. As a result, no cold gas is lost and the wart can be gradually frozen to its core in just 10 seconds! This gradual freezing makes the treatment less painful than existing freezing methods, which is convenient when treating small children. After the treatment, the wart usually falls off after 10 to 14 days and new, healthy skin becomes visible.
For treating water warts, the treatment method works slightly different. The difference is in the dosage, which is less for water warts. Water warts are only slightly frozen when treated with the Wart Freezer, which makes them dry out, less itchy and disappear faster. Because water warts are less itchy after treatment, a child will scratch less, thus preventing further infection of the body or that of other children. It also reduces the risk of scarring.
The Wart Freezer product is ready to use immediately and does not need to be assembled beforehand by the end-user. It is therefore super easy to use!
This product is a medical device, the instructions should be read carefully before use.
1 Aerosol dispenser with cap, contains 38 ml dimethyl ether
8 Protective plasters
16 Cleaning swabs
1 Instruction for use
Please note! The content of this product may vary by country and sales point, but this does not affect the treatment.
Treatment method for hand and foot warts
The Wart Freezer product is ready to use immediately and does not need to be assembled beforehand. The plastic applicator cap should therefore not be removed from the aerosol. The diagram in the instructions should be used to determine the size of the wart to be treated.
Step 1: Position the wart upwards and place the opening of the applicator over the wart so that the edges of the opening fit closely to the skin.
Step 2: Hold the applicator firmly with the fingers and activate the aerosol by pressing it firmly with the thumb 3 to 5 times (depending on the size of the wart) in quick succession. Then hold the applicator placed on the wart for 10 seconds. Remove the applicator from the wart after 10 seconds.
After use, clean the opening of the applicator with a cleansing swab. For raised and/or very sensitive warts, a plaster can be applied to protect the treated wart.
Treatment method water warts
The Wart Freezer product is ready to use immediately and does not need to be assembled beforehand. The plastic applicator cap should therefore not be removed from the aerosol.
Step 1: Position the water wart upwards and place the opening of the applicator over the water wart so that the edges of the opening fit closely to the skin.
Step 2: Hold the applicator firmly and activate the aerosol by pressing it firmly with your thumb 3 times in quick succession. Then hold the applicator placed on the water wart for 5 seconds. After 5 seconds, remove the applicator from the water wart.
After use, clean the opening of the applicator with a cleansing swab. Apply a plaster to very sensitive water warts.
After treatment
During or immediately after treatment, a slightly painful or tingling sensation may occur, which will gradually disappear. Blisters may also form after treatment, but it is important not to puncture them. Blistering is usually an indication of effective treatment. It is also important to leave the wart alone after treatment and to keep the treated area clean. It is possible to wash the hands or feet, and to shower or swim after the treatment.
Caution! The HeltiQ Wart Freezer is contraindicated for the following:
Did you know that? The effect of freezing a skin tag is even better immediately after showering? The tissue of the skin tag is then softer, allowing the product to do its job even better.